Allis G restore
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54339
Printed Date: 15 Nov 2024 at 5:49am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis G restore
Posted By: Richardmo
Subject: Allis G restore
Date Posted: 28 Jul 2012 at 11:51pm
Well i am on my second Allis G primed most of the parts and painted some getting it back togther.
Rebuilt the front axle supports new bushing and bolts/pins got built back up.
new brakes and seals transmission is quite.
Gas tank linned with POR 15.
|
Replies:
Posted By: Warren(Oh)
Date Posted: 29 Jul 2012 at 6:12am
Looks good. Sure wish I was that far along...
|
Posted By: Jim Lindemood
Date Posted: 29 Jul 2012 at 7:23am
Posted By: Richardmo
Date Posted: 03 Aug 2012 at 1:48pm
Update on my Allis G primed and painted the wheels also the main part of the tractor and the sheet metal.
bolt the rear rims on.
still need to paint the plow.
|
Posted By: bigallis1
Date Posted: 03 Aug 2012 at 3:25pm
Posted By: Richardmo
Date Posted: 04 Aug 2012 at 10:56pm
A little closer to finishing the Allis G
Installed the fenders and all the wheels.
Still need to paint the battery box and do some paint touch up.
|
Posted By: MNLonnie
Date Posted: 04 Aug 2012 at 11:03pm
Looks great.
------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker
|
Posted By: Thad in AR.
Date Posted: 05 Aug 2012 at 7:23am
A great job Richard. I'm wondering what the temporary rear wheels were off of? I need somthing so I can move one of mine around.
|
Posted By: jaybmiller
Date Posted: 05 Aug 2012 at 8:28am
GMC truck rims ! my 'parts' G is on a pair as well as the 'parts' C.....
yeah, Chevy rims probably also fit...I just KNOW the rims came off a GMC..
hth
jay
------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
Posted By: tractorman
Date Posted: 05 Aug 2012 at 8:28am
hey! whatis that high lift gizmo your hanging spare parts on? Looks like it needs an orange touch up and a few parts !
------------- Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190
|
Posted By: BRIIAN D
Date Posted: 06 Aug 2012 at 10:38pm
lookin real nice good to see another Allis G restored!!!!!!!!!!!!!
|
Posted By: Richardmo
Date Posted: 07 Aug 2012 at 6:51am
The spray rig is a has a d17 diesel engine and from the torque tube back is a D 15 diesel rear half.
the rear wheels and front are UC high crop parts.
Here are some better pictures.
|
Posted By: tractorman
Date Posted: 07 Aug 2012 at 8:16am
Really neat, looks like it might run ? is it one a restore someday list for a show piece?
------------- Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190
|
Posted By: Richardmo
Date Posted: 23 Sep 2012 at 9:45pm
Had the G out for some plowing on saturday here are couple pictures.
Also the next motor i am getting ready the person who ran the motor never change the oil one valve is burn out.
Yes i want to paint up the sray rig but it behind quite a few projects.
|
Posted By: Warren(Oh)
Date Posted: 24 Sep 2012 at 3:51am
Richard, that engine looks worse inside than the one I'm working on, valve copartment looks about the same except there's rust in mine. It'll run someday, other things to do for now.
Can't wait to turn some dirt with it ! That one looks nice !
|
Posted By: Jim Lindemood
Date Posted: 24 Sep 2012 at 7:38am
Plowing with the G -- neat -- someday maybe I will be able to with my G.
|
Posted By: Dusty MI
Date Posted: 24 Sep 2012 at 8:04am
The G is a very fun tractor to plow with. I have 2 pair of left and right plows for mine, 2 different models.
Dusty
------------- 917 H, '48 G, '65 D-10 series III "Allis Express"
|
Posted By: Warren(Oh)
Date Posted: 24 Sep 2012 at 5:05pm
Rub it in Dusty ! I want a manual lift assembly and plow SO BAD !!!!!!
|
Posted By: Richardmo
Date Posted: 08 Jun 2015 at 3:59pm
To follow up on this tractor put another motor in it as the one I had was temporary as it some to much.
Complete rebuild with new pistons and bored the block, crank was turned and all the rods had to resized.
Got to some more plowing and it run great no issue's.
Here are the pictures. http://s128.photobucket.com/user/richhc/media/Allis%20G/AllisG100.JPG_zps8bwld8ot.jpg.html" rel="nofollow"> http://s128.photobucket.com/user/richhc/media/Allis%20G/AllisG101.JPG_zpslykscyoq.jpg.html" rel="nofollow"> http://s128.photobucket.com/user/richhc/media/Allis%20G/AllisG102.JPG_zpsfmbqhcgl.jpg.html" rel="nofollow"> http://s128.photobucket.com/user/richhc/media/Allis%20G/allisg103.JPG_zpsywlbpety.jpg.html" rel="nofollow"> http://s128.photobucket.com/user/richhc/media/Allis%20G/AllisG105.JPG_zpshzpsvzrf.jpg.html" rel="nofollow">
|
Posted By: Steve in NJ
Date Posted: 08 Jun 2015 at 6:03pm
Rich, Looks great man! You have Tractors spread around your property like Danilelions!! LOL!
------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: B26240
Date Posted: 08 Jun 2015 at 6:29pm
That little fellow sure does a nice job plowing !!
|
Posted By: Richardmo
Date Posted: 13 Jul 2015 at 9:19pm
not much of Garden this year 2 short rows. but still got use the Narrow up Allis G tonight.
http://s128.photobucket.com/user/richhc/media/Allis%20G/AllisNG.JPG_zpszzi9os3t.jpg.html" rel="nofollow"> http://s128.photobucket.com/user/richhc/media/Allis%20G/AllisNG1.JPG_zpsddi0vug6.jpg.html" rel="nofollow"> http://s128.photobucket.com/user/richhc/media/Allis%20G/AllisNG2.JPG_zpsfolrpniy.jpg.html" rel="nofollow"> http://s128.photobucket.com/user/richhc/media/Allis%20G/AllisNG3.JPG_zpsyutxinmj.jpg.html" rel="nofollow">
|
|