Farm Equipment - Point gap for 47 WC

Print Page | Close Window

Point gap for 47 WC

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54208
Printed Date: 15 Nov 2024 at 6:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Point gap for 47 WC

Posted By: jrsinn83
Subject: Point gap for 47 WC
Date Posted: 25 Jul 2012 at 9:08pm

I have a distributor on my WC and not a mag. What should the point gap be. I have seen in my manual it is .020 but like said i have a distributor so I looked up a WD and it said .022. Anybody want to set me strait on this issue? Thanks

Replies:

Posted By: ctbowles58
Date Posted: 25 Jul 2012 at 9:55pm

I ALWAYS SET THEM AT .020 AND IT WORKS FINE

-------------
190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more

Posted By: Steve in NJ
Date Posted: 26 Jul 2012 at 7:13am

.020 is the magic number.

mailto:Steve@B&B" rel="nofollow - Steve@B&B

Posted By: B26240
Date Posted: 26 Jul 2012 at 7:19am

The way that workes for me is to use two feeler gauges, one .022 and one .018 -- when adjusted correctly the thinner one will go without resistance and the thicker one will be tight. HTH Mark