Farm Equipment - water injection ?

Print Page | Close Window

water injection ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52662
Printed Date: 15 Jun 2024 at 10:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: water injection ?

Posted By: XT in pa
Subject: water injection ?
Date Posted: 26 Jun 2012 at 8:33pm

there was talk bout water injection for a 220 or 210 a while back i need to kno more info on this subject? i want to do this to a 7045 what parts do i need to get, where do i get them at im going to use a washer tank and its pump to power it.how much horse will i get from this. my 7045 is stock never touched the pump its a powershift also will it hurt anything ?

Shawn

-------------
190XT,D17and 7045

Replies:

Posted By: CAL(KS)
Date Posted: 26 Jun 2012 at 9:40pm

there is a ton of onfo on water/meth injection for diesel pickups out there. a tractor application would be similiar. complete kits are available and there are boost/ ex temp controlled not just electronically

you can also buy piecies invividually to build to your need. also lots of DIY info / plans out there too

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: injpumpEd
Date Posted: 26 Jun 2012 at 9:45pm

I don't really think water inj will help a stock tractor much. It's main purpose is to help cool the charge temps on a heavily fueled turbo diesel engine.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: tbran
Date Posted: 27 Jun 2012 at 7:02pm

M&W made a kit long ago - didn't last long. Long term useage erroded intake valve seats and stems. As stated water injection is for those short burst of power and the need to cool the intake air to prevent piston cooking. Water injection in your application will not affect hp.