Farm Equipment - WD engine parts wanted

Print Page | Close Window

WD engine parts wanted

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50507
Printed Date: 21 Aug 2025 at 6:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD engine parts wanted

Posted By: Mike56073
Subject: WD engine parts wanted
Date Posted: 13 May 2012 at 7:13pm

Looking around for a connecting rod bolt and nut(cotter pin style), and a front crankshaft pulley. The pulley needs to be off a wide front so the hand crank will work.

Replies:

Posted By: SteveM C/IL
Date Posted: 13 May 2012 at 8:37pm

Isn't the pulley the same? The wide front on my 45 has a different end on crank rod to work at an angle to the pulley.

Posted By: Mike56073
Date Posted: 13 May 2012 at 8:44pm

No, the tractors with a narrow front use one part number, while the wide front and single wheels use another. I've got a narrow front pulley, but the tractor has been converted to a wide front and the owner wants the handcrank to work.

Posted By: SteveM C/IL
Date Posted: 13 May 2012 at 8:52pm

Can't speak to part #'s but I put a wide front under my originally narrow front 45 and the hand crank works the same pulley.