Print Page | Close Window

head torque on head uc

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=5020
Printed Date: 28 Jan 2025 at 11:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: head torque on head uc
Posted By: johnny
Subject: head torque on head uc
Date Posted: 11 Dec 2009 at 10:22am

I have he service manual for the uc and while it talks about the head removal and replacement it does not give a figure for torque of head bolts it just says tight.  What do you think the torque should be.  Also I have never put any thing on a head gasket before and always had good luck should this gasket be coated with something prior to installlation?

 

thanks

johnny




Replies:
Posted By: everett048
Date Posted: 11 Dec 2009 at 1:50pm
Jonny head torque is 75 lbsft just be carefull with the drilled stud they do twist off. hth


Posted By: Leon B MO
Date Posted: 11 Dec 2009 at 2:35pm
Also start in the middle and work your way to the edges, and start at 60 and go up 5 each time through. I do not put anything on the gasket.
Leon B MO



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net