HD5G Blade Mods
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=5019
Printed Date: 21 Feb 2025 at 6:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD5G Blade Mods
Posted By: Osage_Orange
Subject: HD5G Blade Mods
Date Posted: 11 Dec 2009 at 9:51am
My HD5G has a home made blade (from a cut down bucket) complete with a cutting edge. I'm looking for ideas on how to keep the blade from collecting dirt while pushing brush. I tried making a brush rake, but it did not work.  Thinking of making some device to cover the cutting edge. One thought I had is to weld a piece of pipe on the bracket near the cutting edge? Ideas, comments, and experiences would be appreciated.------------- Why is there never time to do it right the first time, but always time to go back and fix it? |
Replies:
Posted By: Osage_Orange
Date Posted: 11 Dec 2009 at 9:52am
|
How do I upload a pic so it appears at the end of the text instead of within the text? ------------- Why is there never time to do it right the first time, but always time to go back and fix it? |
Posted By: Coke-in-MN
Date Posted: 11 Dec 2009 at 11:34am
|
When you upload the pic , watch where the line at end of text is , and move it to place picture . Also put text in first ,
I thought you had a 5B but see it is a 5G , as far as dozer the plade has to be clean or dirt will stick, scouring it clean is only way .  ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |