Farm Equipment - D17 Series IV gas throttle/governor linkage

Print Page | Close Window

D17 Series IV gas throttle/governor linkage

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=50079
Printed Date: 22 Sep 2024 at 6:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Series IV gas throttle/governor linkage

Posted By: DEP5
Subject: D17 Series IV gas throttle/governor linkage
Date Posted: 05 May 2012 at 6:52am

For D17 Series IV gas, to what point does the #7 compensating spring attach? It hooks around the neck of the stud bolt but what about the other end? Thanks
Click to View-> uploads/6620/Governor_Compensating_Spring.jpg" rel="nofollow - uploads/6620/Governor_Compensating_Spring.jpgD17

-------------
D10 Series III, fully optioned

Replies:

Posted By: Ky.Allis
Date Posted: 05 May 2012 at 10:50am

On my D-17 ser.3,it hooks on a bracket with a hole in it. I tried to order a new spring for mine last year and was told it was not available from AGCO. Then they said there was a New Holland spring that was identical. So I ordered it fron NH dealer,but it was not the correct spring. I did use it ,but had to use a "s" hook to make it reach. I used the tractor for 2 years with spring broke and I don't see much difference with it on or off. I do think the throttle responds a little quicker with it on.