Farm Equipment - No oil pressure

Print Page | Close Window

No oil pressure

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49952
Printed Date: 25 Aug 2025 at 9:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: No oil pressure

Posted By: Larry in Ill
Subject: No oil pressure
Date Posted: 02 May 2012 at 10:57am

The belt on my C was a bit loose overheating the engine and I lost all oil pressure. I was unsuccessful in priming the pump. Before I split it, what are some tricks to prime it and what could have happened? It does have a Wix fiber element filter.

Thanks for any ideas

Replies:

Posted By: Don(MI)
Date Posted: 02 May 2012 at 11:05am

Read this....

http://www.allischalmers.com/forum/forum_posts.asp?TID=43502&KW=&title=c-oil-pressure-problems" rel="nofollow - http://www.allischalmers.com/forum/forum_posts.asp?TID=43502&KW=&title=c-oil-pressure-problems

I went through this also, not too long ago.

-------------
Galatians 5:22-24

"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"

Posted By: Larry in Ill
Date Posted: 02 May 2012 at 12:23pm

Thank Don,

At least I will know what to look for when I split the tractor.

Posted By: AJ
Date Posted: 02 May 2012 at 12:26pm

Take the line off just before the oil filter and shoot some oil up the like several times. Reattach and start. Give a few seconds and the gauge should start going up to normal again.

-------------
Can't fix stupid