D 10 Manual Ser 9001
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=4875
Printed Date: 16 Jan 2025 at 1:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D 10 Manual Ser 9001
Posted By: Joe/NC
Subject: D 10 Manual Ser 9001
Date Posted: 08 Dec 2009 at 9:17pm
|
Is there a D 10 Operating Instructions Manual l for Ser # 9001 and up? I have one for 3501 & up. If so any one have one for sale? Thanks |
Replies:
Posted By: Joe/NC
Date Posted: 08 Dec 2009 at 10:03pm
|
Found 1 on EBAY. If I don't win I'll re post later Thanks. |
Posted By: Dusty MI
Date Posted: 09 Dec 2009 at 7:55am
|
I believe there is. Check with an AGCO dealer. I've found that's place to get manuals anyway. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: DiyDave
Date Posted: 09 Dec 2009 at 8:11am
| This site has one listed for $19.99, or you could try sandy lake equipment, or your local Agco dealer, if you still have one close. I think the agco manuals supercede each previous, so buying the current one gives you all of the info in prior series, + the last series made. |
Posted By: JoeO(CMO)
Date Posted: 09 Dec 2009 at 8:35am
|
I have an extra Series III manual if you need one |
Posted By: Gary
Date Posted: 09 Dec 2009 at 11:18am
|
DIY Dave - I think you are thinking of the I & T Service Manuals that the latest issue Supersedes all previous issues for that Model.
Eg. I & T AC20 replaced AC14 and AC10 for D-10 / D-12.
I have an Operators Instructions for D-10 / D-12 Series III and
along the edge of Cover Page it says "Serial No. 9001 and up"
Allis Form TM-368
Gary
|
Posted By: DiyDave
Date Posted: 09 Dec 2009 at 11:47am
No, Gary, agco manuals that are published now, red or orange cover, have all of the info, on all of the series of the D series, included in each of the manuals. I love the sentence structure in I&T manuals, like loosen the 14 bolts on the oil pan (end of page, turn the page over) But first make sure the 375 lb oil pan is supported adequately. LOL The agco manuals are much better written, and are basically reprints of the originals, maybe a little condensed, on redundant info (what stayed the same on earlier tractors, vs what changed). |
Gary wrote:Posted By: Dusty MI
Date Posted: 09 Dec 2009 at 11:54am
|
DiyDave is right about the AGCO manuals. And I think they are a very reasonable price. I look at them as an inexpensive and very useful tool. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Gary
Date Posted: 09 Dec 2009 at 12:21pm
|
Thanks Dave for the update on Manuals.
All the ones I have are original Allis manuals from the 40, 50, and 60's era.
Gary
|