Farm Equipment - roll over plow

Print Page | Close Window

roll over plow

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48272
Printed Date: 27 Aug 2025 at 4:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: roll over plow

Posted By: acd17toy
Subject: roll over plow
Date Posted: 31 Mar 2012 at 7:17pm

Going to use my 2 bottom roll over plow for the first time. how do you adjust it so that it does a good job of turning over the ground? still waiting on the manual for it to come.

Replies:

Posted By: Chalmersbob
Date Posted: 31 Mar 2012 at 8:28pm

I found the if you drive one side of the tractor up on a 6X6 blocks, you can adjust the plow to lay flat on the ground. With a roll-over you do that on both sides. If yours is like mine, the bar that the lock pin snaps into is adjustable for each side. When I changed my plow to a different tractor, the rear of the left side was not penetrating far enough, so I loosened the bolt and pivoted the plow to compensate for that. Each bracket has a slot for adjusting. Bob