Farm Equipment - WD steering shaft bushing replacement

Print Page | Close Window

WD steering shaft bushing replacement

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=4824
Printed Date: 15 Jan 2025 at 10:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD steering shaft bushing replacement

Posted By: Osage_Orange
Subject: WD steering shaft bushing replacement
Date Posted: 07 Dec 2009 at 8:43pm

Is there a simple way to replace the upper steering shaft bushing (near throttle/lift quadrants) without removing the steering wheel? I thought about just bending a piece of thin steel around the shaft and sliding it in place. Would have to do something to it to keep it from sliding down the shaft. I'm hoping you fellas have some better ideas?

-------------
Why is there never time to do it right the first time, but always time to go back and fix it?

Replies:

Posted By: NCAllisnut
Date Posted: 07 Dec 2009 at 8:48pm

Another option is to drive the pin out of the u-joint behind the frame rail and pull the wheel and shaft out, then put a new bushing in the quadrant.

Adam