Farm Equipment - D14 throttle linkage not working correctly

Print Page | Close Window

D14 throttle linkage not working correctly

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48072
Printed Date: 24 Aug 2025 at 12:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 throttle linkage not working correctly

Posted By: chris502
Subject: D14 throttle linkage not working correctly
Date Posted: 28 Mar 2012 at 10:22am

Hey guys I got a rebuild kit for the carb. and when I re assembled everything, the throttle linkage wants to stay wide open. When you throttle down it is completely un-responsive. Even throttling up yields very little effect.

So if anyone knows what the problem may be feel free to assist. Any suggestions will be greatly appreciated. Thanks.

Replies:

Posted By: Gary
Date Posted: 28 Mar 2012 at 10:30am

Sounds like the lever on the Carb. throttle shaft is pointing in the wrong direction.

Down vs Up OR vise-versa. Not sure which is right.

Where's Steve B&B the Carb expert.

Gary

Posted By: chris502
Date Posted: 28 Mar 2012 at 10:48am

Well problem solved. After I posted I thought about a previous post where they were talking about the throttle rod. I bent it a few different waya and hit it just right. Now it works as it should minus the fact that it is running like crap. So I think I will research getting the carb adjusted right. So thanks anyway.

It sounds like I do need to talk to the carb guy you mentioned.