Allis cs
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48058
Printed Date: 27 Aug 2025 at 3:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis cs
Posted By: SCOOTER99
Subject: Allis cs
Date Posted: 27 Mar 2012 at 11:40pm
| I have a 1953 ca and need to know what the hitch is suppose to look like I need to see pictures can anyone help me |
Replies:
Posted By: MNLonnie
Date Posted: 28 Mar 2012 at 6:02am
|
There are a couple different styles that were available on the CA's. I don't have any pics but someone will, maybe Bruce or Mark willl have some, they are your neighbors up there. Does yours have a regular drawbar or a snap coupler or is it all missing? ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: Dakota Dave
Date Posted: 28 Mar 2012 at 6:38am
| 53 should have a pin hitch. I'll try to get a picture after the sun comes out. The lift arms point straight down and a cross bar pins to them. |
Posted By: CTuckerNWIL
Date Posted: 28 Mar 2012 at 7:02am
Here is a snap couple set-up which started in 1953. The lift arms are shorter and the bail isn't attached to the the lift arms. The pin hitch drawbar pinned under the bell and pinned to the lift arms after they were set vertical. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Gary
Date Posted: 28 Mar 2012 at 7:59am
|
In Charlie's picture of a CA 'Snap Coupler' set-up, 'Lift Arm Latches' would be installed on the outer end of each lift arm to complete the 'Snap Coupler Hitch' set-up. Gary
|
Posted By: SCOOTER99
Date Posted: 28 Mar 2012 at 8:41am
| My setup is not like that I took a pictue I dont know how to upload it |
Posted By: Dakota Dave
Date Posted: 28 Mar 2012 at 11:28am
backed the tractors out and took a couple pictures this is the older pin hitch. thie tractor is an early 53. the later tractors had the snapcoupler setup.  
|
Posted By: CTuckerNWIL
Date Posted: 28 Mar 2012 at 11:30am
Here is the pin hitch set up. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: SCOOTER99
Date Posted: 28 Mar 2012 at 10:30pm
|
Those pictures helped thanks New question 3 gear is out do I have toreplace both gears |
Posted By: CTuckerNWIL
Date Posted: 29 Mar 2012 at 8:37am
|
If things aren't too bad in the tranny, you might not have to replace any gears. the collar is all that is shifted and if it has most of the wear, the tranny might work for a long time with it replaced and slop taken out of things. It's kinda a wait and see thing till you tear it down and inspect everything. The more times 3rd is used and pops out , the worse the spline on the gear and the more chance of having to replace it $$$$$. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |