Farm Equipment - need advice - B hydraulic set-up

Print Page | Close Window

need advice - B hydraulic set-up

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48025
Printed Date: 28 Aug 2025 at 7:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: need advice - B hydraulic set-up

Posted By: didgood
Subject: need advice - B hydraulic set-up
Date Posted: 27 Mar 2012 at 11:27am

What do you guys use to go from the hydraulic pump to the two way valve body? I picked up parts on ebay and the dude had thin wall tubing here, which isn't rated anywhere near the PSI that the pump will produce.

Also, what grade/material fittings should I use?

Thanks

Replies:

Posted By: Charlie175
Date Posted: 27 Mar 2012 at 2:06pm

I went to my local carquest where they make hydraulic hoses, I think mine was $25 for a 24" piece to my RAM.

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: BrettPhillips
Date Posted: 27 Mar 2012 at 3:30pm

I got away with brake line for a few years until it cracked next to the flare. If you're really careful not to scratch the tubing, or if you polish off any scratches before using it, you might be OK. I was fortunate to find an NOS tube for mine.

Posted By: didgood
Date Posted: 27 Mar 2012 at 4:11pm

thanks for the tips

decided to have some custom hoses made up at a local joint - they specialize in all kinds of custom hydraulic applications