7040 injection pump
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47991
Printed Date: 28 Aug 2025 at 7:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7040 injection pump
Posted By: Hurt Farms
Subject: 7040 injection pump
Date Posted: 26 Mar 2012 at 8:36pm
|
i just bought a 7040 and when u idle it down it goes dead,so i took the top off the pump and cleaned the meteing valve and just about everything else in there.i also took the kill solenoid out(must've came off a combine).i pulled a disk the next day and it still goes dead when u idle down and doesnt pull worth a crap.so do i need to have my pump built or is there anything else i can do?who's the best pump rebuilder?
|
Replies:
Posted By: injpumpEd
Date Posted: 26 Mar 2012 at 9:02pm
Check all the lines and make sure you don't have a restriction on the inlet line, or an air leak. I can rebuild it if needed. thanks, Ed.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: Hurt Farms
Date Posted: 27 Mar 2012 at 10:21pm
|
how much,where u located,what kinda warranty,how much will u turn it up
|
Posted By: injpumpEd
Date Posted: 28 Mar 2012 at 6:23am
I'm in North central IL. I will set it how you need it. PM me for more details.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|