Print Page | Close Window

D17 power steering line needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47894
Printed Date: 10 Jan 2025 at 9:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D17 power steering line needed
Posted By: ironac
Subject: D17 power steering line needed
Date Posted: 25 Mar 2012 at 4:40pm
Working on a FFA project and need a discharge tube/line for a earlier d17. Thanks



Replies:
Posted By: norm[ind]
Date Posted: 25 Mar 2012 at 7:46pm
   TELL ME A PART #   WERE 3 DIFFERENT POWER STEERING PUMPS USED     EVERTHING WOULD BE A GUESS   1-574-342-4545 FOR INFO.


Posted By: Unstylish
Date Posted: 25 Mar 2012 at 7:59pm
Call me 269 921 4686. If its ffa, you can have it, if I have it. Andrew

-------------
The problem with reading MLPANKEYS posts, is that they dont make boots that tall.


Posted By: ironac
Date Posted: 25 Mar 2012 at 9:45pm
I will find the part number and give you a call when I get the number. It's a 1959 d17 gas that is going to the Iowa state fair. Thanks


Posted By: pied
Date Posted: 26 Mar 2012 at 2:18pm
     Did you rebuild the power steering front support? If so how difficult was it? I'm having problems with my D17 Series IV. Seems something let go in the front support and I was wondering what I'm about to get myself into.Confused 


Posted By: ironac
Date Posted: 26 Mar 2012 at 2:24pm
The ram rack was broke on it so that was replaced. I thInk the powersteering setup on a series 3 and 4 are differnt from the earlier 1 and 2


Posted By: pied
Date Posted: 26 Mar 2012 at 2:33pm
  Was it a very complicated task? How hard was it to find the correct replacement parts?


Posted By: norm[ind]
Date Posted: 26 Mar 2012 at 7:43pm
  HAVE REPAIRED BEFORE  MAY JUST HAVE THE PIN SHEARED  HAVE THE PIN IN STOCK
   GOOD PROJECT   WAS DONE ON TRACTOR


Posted By: pied
Date Posted: 26 Mar 2012 at 9:33pm
   Will I have to drop the whole front support to check if its the pin?Ouch


Posted By: OrangePowerFranzen
Date Posted: 26 Mar 2012 at 10:30pm
ive been working on this d17 with ironac, and this is what we had to do for drop that front powersteering gear and rack. we r looking for the largest tube that runs from under the front of the left side of the engine , runs to the right side and up to the powersteering, its the largest of the 3 tubes that are present.




Posted By: Ray
Date Posted: 27 Mar 2012 at 10:22am

I would have the line. Need to know which one. 785-353-2392



Posted By: Matt MN
Date Posted: 27 Mar 2012 at 11:01am
you say you need the discharge line? which is part #70229825 for a gas tractor



-------------
Unless your are the lead horse the scenery never changes!!


Posted By: Charlie175
Date Posted: 27 Mar 2012 at 11:24am
how the heck do you break that?



-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD


Posted By: TexasAllis
Date Posted: 27 Mar 2012 at 4:01pm
Originally posted by pied pied wrote:

   Will I have to drop the whole front support to check if its the pin?Ouch
I had to replace the seal on the main steering shaft.  The hardest part for me was moving the front wheel assembly out from under the tractor.  Two people really helps.  The bolster is heavy but take out four bolts and support it with a block and jack and you are good to go.

-------------
1944 Allis C
1960 Allis D-17 LP


Posted By: OrangePowerFranzen
Date Posted: 27 Mar 2012 at 5:24pm
i will look up that part number tonight, i beleive that the fluid had water in it and froze up and thats how that ram rack broke, it surprised both of us to


Posted By: OrangePowerFranzen
Date Posted: 02 Apr 2012 at 11:21pm
still looking for the power steering line, does anyone know of the allis chalmers salvage yard located by anamosa, iowa? ive seen it in a tractor house book and was wondering if anyone knew of the guy that runs the place


Posted By: Ray
Date Posted: 03 Apr 2012 at 11:12am
I am shure I have what you need. Will  need no , picture ,some thing.785-353-2392



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net