Farm Equipment - Early wd Torque housing seal

Print Page | Close Window

Early wd Torque housing seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47844
Printed Date: 28 Aug 2025 at 3:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Early wd Torque housing seal

Posted By: Mike56073
Subject: Early wd Torque housing seal
Date Posted: 24 Mar 2012 at 5:31pm

I am restoring an early wd, and was going to reseal the torque housing today, but ran into a snag. It has the updated double seal, spacer and adapter on the shaft. In the past I've been able to use 2 seals back to back with no problem, but the housing must be thinner on this early one where it retains the seal. I can tell on the old seal that it was only pressed in about half of its depth. Does AGCO still make this double seal? Their part # is 702715922. If anybody would have a national or other aftermarket number that will work too......Thanks