Farm Equipment - d-17 throttle conversion

Print Page | Close Window

d-17 throttle conversion

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47843
Printed Date: 27 Aug 2025 at 5:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d-17 throttle conversion

Posted By: ORANGE JUICE
Subject: d-17 throttle conversion
Date Posted: 24 Mar 2012 at 5:00pm

I need the solution to convert my power unit motor to tractor. I got a little ahead of myself and mounted the motor and front end so I need a bushing and a seal for the lever going in to the front cover. I hope this can be done with the front cover still on the tractor. Any help will be appreciated greatly.

Replies:

Posted By: Orange Blood
Date Posted: 25 Mar 2012 at 7:42am

Hey Orange Juice,

Well, you probably can, if the distributor or Power steering drive is removed, and the front governor cover is also off, however you run a high chance of loosing parts down inside the engine. I would stuff old T-shirt rags in ever nook and cranny around the cam gear, front and back, the reason I say T-Shirt rags, is because they will stay together when you go to pull them out, paper towels may soak oil, and come apart or tear when you go to pull them out, and then you have more work to do. Anyway, you have to remove the governor bearing fork from the end of the shaft before removing the rod out the other side.

-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7

Posted By: ORANGE JUICE
Date Posted: 25 Mar 2012 at 1:34pm

Anybody know the seak number

Posted By: Gary
Date Posted: 25 Mar 2012 at 4:32pm

Is that the same as Seik Number - 911

Gary

Posted By: ORANGE JUICE
Date Posted: 01 Apr 2012 at 2:27pm

Looks like the seal (not seak) number is 51x14. I cant make out the manufacturer.

Posted By: norm[ind]
Date Posted: 01 Apr 2012 at 2:47pm

we have the seal and bushing in stock 1-574-342-4545