Print Page | Close Window

Power Director to Shuttle Clutch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=4761
Printed Date: 26 Jan 2025 at 8:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Power Director to Shuttle Clutch
Posted By: orangeman
Subject: Power Director to Shuttle Clutch
Date Posted: 06 Dec 2009 at 6:41pm

Can this be done on a D17 Series IV?

Has anyone tackled this?  Need this machine to become my loader tractor.
 
I realize that the front tires and rims would need to be 11Lx 16 and a fixed front axle.
 
Any thougths appreciated.



Replies:
Posted By: TomMN
Date Posted: 06 Dec 2009 at 7:58pm
There are six different gears in the torque housing that make the tractor go forward or backward instead of having two speeds forward on the regular power director.  The shuttle clutch itself is also different it has 9 clutch plates and 7 discs vs. 7 and 5 on the power director.  If Agco has the gears the power director clutch might still work.  Has anyone done this?  HTH Tom



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net