Farm Equipment - WD-45 3 point conversion plowing

Print Page | Close Window

WD-45 3 point conversion plowing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47464
Printed Date: 25 Sep 2024 at 7:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD-45 3 point conversion plowing

Posted By: Zyta
Subject: WD-45 3 point conversion plowing
Date Posted: 17 Mar 2012 at 7:50pm

Anyone out there using a WD-45 with a 3 point conversion for plowing. Does it even work? anyone have any photo's?

Replies:

Posted By: AC WD45
Date Posted: 17 Mar 2012 at 8:03pm

yes, yes, and no i don't, but with a set of wheel weights and loaded tires I can run a 3-14 just fine

-------------
German Shepherd dad
1957 Allis Chalmers WD45
#WD234847
1951 Allis Chalmers WD
#WD88193

Posted By: Zyta
Date Posted: 17 Mar 2012 at 8:12pm

I have converted my 45 over to 3point using the pieces from a David Brown and have a nice AC 16'' 3 bottom plow. I was hoping this set up would work as good as the old snap coupler.

Jim

Posted By: AC WD45
Date Posted: 17 Mar 2012 at 8:51pm

not sure how it will do on a 3-16 without being able to utilize Traction Booster. best thing to do is get a 3pt S/C adapter, then you can still use the traction booster.

-------------
German Shepherd dad
1957 Allis Chalmers WD45
#WD234847
1951 Allis Chalmers WD
#WD88193

Posted By: AC WD45
Date Posted: 17 Mar 2012 at 8:53pm

one idea I had was to take the two point arms, and fab somthing so they attach to the snap coupler bar. if I do it, I'll let you know how it works

-------------
German Shepherd dad
1957 Allis Chalmers WD45
#WD234847
1951 Allis Chalmers WD
#WD88193