Farm Equipment - Need Help D10 sterring box!!

Print Page | Close Window

Need Help D10 sterring box!!

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47215
Printed Date: 21 Aug 2025 at 5:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need Help D10 sterring box!!

Posted By: Jamie NC
Subject: Need Help D10 sterring box!!
Date Posted: 13 Mar 2012 at 9:32pm

I need the part number for the bearings on the worn gear shaft .

Jamie

Thanks

-------------
Allis tractor puller CA WC WD D17

Replies:

Posted By: GregLawlerMinn
Date Posted: 14 Mar 2012 at 2:33pm

I think the bearings are the "open race" type. I have used the balls from a sealed 6205 bearing (avail at your auto store or snowmobile dealer). Do not have a source for the races (am not located near any real good bearing house); and have had to reuse the ones in the box. I have found that placing the lower race in the upper position and lower race in the lower position works better (the lower race generally has more pitting/corrosion than the upper race.

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: Gary
Date Posted: 14 Mar 2012 at 3:48pm

Did you mean to say "UPPER race in the lower position"

in other words switching locations with the two existing bearings.

Gary

Posted By: Jamie NC
Date Posted: 14 Mar 2012 at 10:41pm

thanks for the info guys

-------------
Allis tractor puller CA WC WD D17