Construction and other equipment

Print Page | Close Window

HD11E damper

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47087
Printed Date: 23 Jun 2025 at 2:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD11E damper

Posted By: Firestorm84
Subject: HD11E damper
Date Posted: 11 Mar 2012 at 6:55pm

Was wonderin if any one knew where you could get the damper for the front of the crank? mine seperated in to two pieces.

Replies:

Posted By: Chris/CT
Date Posted: 11 Mar 2012 at 7:12pm

Which engine you have in that machine??

Posted By: Ian Beale
Date Posted: 12 Mar 2012 at 4:01am

Firestorm

FWIW

The HD 11 parts book I have access to (covers 11E's) to says in part numbers that

#4335937 fits before and after engine #10-4855

Posted By: Firestorm84
Date Posted: 12 Mar 2012 at 9:06am

Its the 11000 engine I have the part number(4335937) just not sure where to get on?

Posted By: doctorcorey
Date Posted: 12 Mar 2012 at 9:17am

I think Zimmerman tractor in Missouri has a couple of HD11's. Might try them.

Posted By: Chris/CT
Date Posted: 12 Mar 2012 at 6:17pm

I have the # 4037201 and pulley for the 426 ci/D21 engine on shelf, NOS, sorry doesn't look like it will work for u.

Posted By: gemdozer
Date Posted: 13 Mar 2012 at 12:31pm

I had this damper 3 week pass but he is sold now and I just speak with a friend

and he has one on a motor if you can't find one near your place he could sold it.

Posted By: Lazyts
Date Posted: 14 Mar 2012 at 10:03am

I should have one- I'll check the condition if you are interested.

Posted By: Firestorm84
Date Posted: 18 Mar 2012 at 9:23am

If you got one in good shape would be great.

Posted By: Lazyts
Date Posted: 18 Mar 2012 at 12:47pm

I looked at it- it doesn't look very good. You can have your damper rebuilt, though- www.dalemfg.com

Posted By: Firestorm84
Date Posted: 18 Mar 2012 at 6:11pm

ok thanks