Farm Equipment - wd45 steering knuckle repair

Print Page | Close Window

wd45 steering knuckle repair

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46900
Printed Date: 30 Aug 2025 at 10:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd45 steering knuckle repair

Posted By: Mike56073
Subject: wd45 steering knuckle repair
Date Posted: 08 Mar 2012 at 6:21pm

Does anybody have a part # for a u-joint kit for the steering shaft? By the way it looks there has to be a small one that should match up..........

Replies:

Posted By: AC-Farms
Date Posted: 08 Mar 2012 at 7:37pm

I've used case-ih part #84355036 from the local dealer. The last one I bought had a zerk in one of the caps, I think it will clear everything ok, if not just have to screw the zerk out and put a plug in.

Posted By: Brian G. NY
Date Posted: 09 Mar 2012 at 9:37am

I got the last kit from NAPA back in 2001.

Their "precision" kit was part #861. It has a grease fitting and the bearing journals and bearings are longer than original but still clear everything fine. It was only $7.99 at that time!

I have cross referenced it to:

A-C #2248900

NEAPCO #1-1475

TRW #20001