D17 SIV wide front pivot pin size?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46765
Printed Date: 30 Aug 2025 at 5:54pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 SIV wide front pivot pin size?
Posted By: Skyhighballoon(MO)
Subject: D17 SIV wide front pivot pin size?
Date Posted: 05 Mar 2012 at 11:48pm
|
Does anyone know for sure what the front pivot pin diameter is on a D17 Series IV wide front? Mine is badly worn and I'm going to replace it and want to make sure the size is right. I measured 1.3" with my calipers but it was hard to measure it accurately with the front end still on the tractor. Also - is AGCO the best place to get a replacement bushing for the casting? Any ideas of how much they are? Thanks! Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Replies:
Posted By: Don(MO)
Date Posted: 06 Mar 2012 at 7:11am
Good news Mike I found a new way to oil changed in your D17IV; but the bad news is we will need some parts to put it back together now.
 I will see of I can get a true size on the pin and let you know maybe today.
 ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Dave in il
Date Posted: 06 Mar 2012 at 8:28am
|
I think Tracy Martin can help you with a replacement pin and mabey a bushing. ------------- AGCO My Allis Gleaner Company |
Posted By: Skyhighballoon(MO)
Date Posted: 06 Mar 2012 at 8:32am
|
Dave - Yep - Already been in contact with Tracy about making the pin. We need to confirm the exact size for a D17 SIV. I was hoping someone had measured it before to confirm what Don and I are seeing. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Russ-neia
Date Posted: 06 Mar 2012 at 9:21am
|
You can check, but we were able to get a new pin from AGCO several years ago and had the local machine shop weld it on. Just make sure you use good steel if you're having it home-made. ------------- The innovators offer what others will imitate. |
Posted By: Don(MO)
Date Posted: 06 Mar 2012 at 8:04pm
|
Mike, Here are the part numbers for the pin and bushing.
70253386 Axle Pivot Pin
70233368 Axle Support Bushing
You might see if Acgo has them.
Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: JoeO(CMO)
Date Posted: 06 Mar 2012 at 8:12pm
|
Mike, how often do you change the oil? I can lend you my creeper the next time if that will help to free up some time to do other things. ------------- |
Posted By: Skyhighballoon(MO)
Date Posted: 06 Mar 2012 at 11:36pm
|
Don - we want Tracy to make a longer pin than stock to getter better pin to pushing contact. Did you measure it at 1.3" after you got the front end out? Let's talk later. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Don(MO)
Date Posted: 07 Mar 2012 at 5:16am
|
Your right Mike I forgot about that. I'll call you after lunch say around 1:30 PM today. Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |