track pins
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46613
Printed Date: 03 Nov 2025 at 9:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: track pins
Posted By: DMiller
Subject: track pins
Date Posted: 03 Mar 2012 at 4:39pm
I am not having very good luck to date, Minnpar says the supplier is discontinuing pins and bushings for the old Allis/FA track, no demand, I am in bad need of two decent order master pins/link sections to repair the rails on my new acquire and seems no one has any as they did have bushings and spacers. 7G, 7GB and HD11 all used 7.0 pitch with 1.554 pins, there has to be a few still around. I can find no specs as to rockwell or alloy so I can get a reasonable close blank stock to make my own. Rail eyes are pretty beaten up but I think I can get a repair on them.
|
Replies:
Posted By: Coke-in-MN
Date Posted: 03 Mar 2012 at 5:29pm
|
Try some of the smaller track shops . Thill track and tractor in Eau Clare WI Crawler Welding in Mankato MN Northern Tractor in Osseo MN Northern Engine and Supply in Duluth MN/ also Montana. Should be some in your area also ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |
Posted By: Lazyts
Date Posted: 03 Mar 2012 at 6:20pm
| I may have a couple of links, bushings and pins laying around to fit 7G and the old HD11- I'll check if you are interested. We cut a track down from 41 to 38 link a few years ago... |
Posted By: DMiller
Date Posted: 04 Mar 2012 at 2:18am
| Hi Coke, did try Thill and a assortment of others all across IL and Mo, sent mail to at least seven so far with poor to no responses all the way out to PA and OH. Looks bleak. I have sent lazyts a PM, may do me some good if he can let them go. This forum has been a wonder as to finding some of the odder stuff I have had need of. |
Posted By: Coke-in-MN
Date Posted: 04 Mar 2012 at 10:14am
------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |
|||||||
Posted By: DMiller
Date Posted: 04 Mar 2012 at 1:49pm
| Sent them a mail, will see what happens. Thanks Coke. |
Posted By: Lazyts
Date Posted: 04 Mar 2012 at 6:45pm
|
Here's what I found: -Several side bars, marked Berco AC404, measuring 3.85 inches tall -One new Berco AC1972 master pin group -Two new master pin groups- unknown manufacture -One new master bushing -Several used full length bushings (could be cut down to make another master) uploads/6683/February_002.jpg" rel="nofollow">  |
Posted By: DMiller
Date Posted: 05 Mar 2012 at 8:13am
| If you can part with the pin sets and bushings(all) I will buy, send me a PM with a price and address, will go from there. It will be in US funds. |