Bareback 190xt
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46542
Printed Date: 03 Sep 2025 at 12:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Bareback 190xt
Posted By: 2wise4agm
Subject: Bareback 190xt
Date Posted: 02 Mar 2012 at 1:10pm
| Anyone ever make a 190xt a bareback? I think I'm going to strictly pull mine and could use to shed a few pounds. I can make a cover plate, I'm just not sure if there is going to be a shaft that will need to be supported, or any other issues. Thanks in advance. |
Replies:
Posted By: Chad (MN)
Date Posted: 02 Mar 2012 at 3:33pm
|
I have a XT that is almost a bareback. I has no 3 point or snap coupler. Since it has PTO, I would have to make a cover w/gasket for the rear housing and take out the shaft. Could you order a XT from the factory with no PTO like a D-21?? ------------- 220 3-190XT 2-D19d D19g 5-D17 UC 3-WC 2-WD 3-WD45 CA C H3 7-AllCrops 14-plows 3-Gleaners Lawnmowers SC-equipment |
Posted By: Orange Blood
Date Posted: 02 Mar 2012 at 3:51pm
|
Best I can tell by studying the Parts book views, which are lacking at best for a case casting view. I would say no, because the PTO shaft and seal pass through from the rear oil sump, to the front oil sump. That would be the only thing I can see. That being said, I don't know why you couldn't fabricate something by welding up the seal center with some lightweight metal.
------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: Calvin Schmidt
Date Posted: 02 Mar 2012 at 4:29pm
|
I've seen a bareback 200 so I'm sure the same applies to a one ninety. ------------- Nothing is impossible if it is properly financed |
Posted By: DrAllis
Date Posted: 02 Mar 2012 at 4:44pm
| Shove a chunk of shaft the right diameter into the seals and retain it with hose clamps or whatever to keep it in place....can be done without spltting tractor. |
Posted By: bradley6874
Date Posted: 03 Mar 2012 at 3:58pm
|
Rubber expandablel freeze plug worked good on my diet d 19 ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: Lonn
Date Posted: 03 Mar 2012 at 7:24pm
Is it oil resistant rubber on those plugs? ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
bradley6874 wrote: