Farm Equipment - Grease zerks

Print Page | Close Window

Grease zerks

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46509
Printed Date: 05 Sep 2025 at 12:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Grease zerks

Posted By: cidrmakr
Subject: Grease zerks
Date Posted: 01 Mar 2012 at 6:53pm

I have an 1952 Allis CA. Seem to recall that there was a grease zerk for the throw out bearing. Can anyone confirm that there is or is not. And, how do you get to it.....
Thanks, John

Replies:

Posted By: 1953CA
Date Posted: 01 Mar 2012 at 6:55pm

Should be under the torque tube, where the clutch inspection hole is.

Andrew

-------------
1945 AllisCletrac / 1948 "B" / 1953 "CA" / 1955 "WD-45" / 1963 "D-15 Series II"

"No Air Support without Ground Support"

Posted By: Dick L
Date Posted: 01 Mar 2012 at 7:04pm

The zerk is for the yoke not the bearing its self. The zerk is on the under side thru the inspection slot just back of the throw out bearing. I have taken several apart the the zerk was gone.

I thought I had a picture but couldn't find it just now.