Farm Equipment - Quick Question about Carb on G

Print Page | Close Window

Quick Question about Carb on G

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46433
Printed Date: 10 Nov 2024 at 3:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Quick Question about Carb on G

Posted By: John Kenny
Subject: Quick Question about Carb on G
Date Posted: 29 Feb 2012 at 2:30pm

Quick Question about a G carb... When putting in the new gasket for the carb does the venturi sit ABOVE the gasket or does it wedge in it with the thinner upper part sticking up and the lower part sitting below the gasket? Also, does the float pin assembly also sit above the gasket in that little notch while the float itself sits below? thanks, the manual is a little confusing. John

Replies:

Posted By: Chalmersbob
Date Posted: 29 Feb 2012 at 11:03pm

you have to install the venturi before the gasket and the float after the gasket.

At least that is how I did mine. Bob