D19 front pump...
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46411
Printed Date: 06 Jan 2025 at 9:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D19 front pump...
Posted By: Travis(NE)
Subject: D19 front pump...
Date Posted: 28 Feb 2012 at 10:18pm
|
While I'm thinking about it and it's cold and rainy out... I have been meening to ask if anyone knew, seen, has, or installed a factory A-C auxiliary hydraulic system on a D19?    I think Eldon(WA) has the set up on one of his D19's? I picked this kit up off of eBay a few years ago, but it is missing some pieces...  Thanks to ChuckLuedtkeSEWI I am now a few more pieces closer to a complete kit since he was nice enough to trade me the diverter valve and the suction line a month or so ago... Again thanks in advance for your thoughts... |
Replies:
Posted By: HagerAC
Date Posted: 28 Feb 2012 at 10:22pm
|
Well ours had a front pump on it when my uncle had it, but he took it off before we bought it, and I am pretty sure it was not a factory kit. I can't imagine there are many of these factory systems around. ------------- 30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52 |
Posted By: skipwelte
Date Posted: 28 Feb 2012 at 11:43pm
| I have a later D19 with the front pump. The original owner had an Oliver loader on it most of its life, he feed a lot of livestock then. (So did we, but not anymore-times sure changed) It works real good, almost true independent hydralics. |
Posted By: Eldon (WA)
Date Posted: 29 Feb 2012 at 12:22am
|
Yes I have one on a D19 with factory 3pt. It also has factory ether assist. I have another NOS pump that I found on Ebay, but no other parts. Hydraulics are twice as fast a stock (with the clutch engaged) 3 seconds for the arms to lift.....6 seconds with the clutch disengaged. ------------- ALLIS EXPRESS! This year: |
Posted By: Eldon (WA)
Date Posted: 29 Feb 2012 at 12:25am
|
Just read the "Operating Instructions"....why would anyone not want to use it???? ------------- ALLIS EXPRESS! This year: |
Posted By: RPSallispullinmd
Date Posted: 29 Feb 2012 at 5:53am
| I have a D19 gas with 500 loader with front pump the oil for the pump is in the loader frame.This combo really makes a nice loader out of it and also has loader controls on left side so you can use the hand clutch and loader at the same time.The tractor and loader is for sale 5500 OBO |
Posted By: Lonn
Date Posted: 29 Feb 2012 at 7:58am
|
Hey Travis, can you provide dimensions on the pump and the pieces you have so a guy can make that setup? Thanks
------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Travis(NE)
Date Posted: 29 Feb 2012 at 6:20pm
I have wondered that myself! The only guess I could come up with is that the extra oil flow may mess with the traction booster system like when using a semi-mounted plow or a snap-coupler disk? |
Eldon (WA) wrote:Posted By: Travis(NE)
Date Posted: 29 Feb 2012 at 6:32pm
At the time I had everything but the diverter valve and some of the steel lines. I put the pieces on that I had and had some hoses made to plumb it in on my tractor a few years ago now and it works great! If I was thinking I would have had the parts blueprinted before I put them on. I am in the process of locating a second set up, also I may be able to take the ones off that I do have and get copies made someday. I fear someday maybe close as I think my liners have recessed in the block and an overhaul will be needed as I am having head gasket issues...  I don't remember if I ever checked availability of the parts at AGCO when I worked there? They are all listed in the parts books. |