More "B" pictures and questions.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=46101
Printed Date: 07 Sep 2025 at 3:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: More "B" pictures and questions.
Posted By: R.W
Subject: More "B" pictures and questions.
Date Posted: 23 Feb 2012 at 5:44pm
What are these brackets for?    What were these Eye-Hooks used for?   Would there be any problem with fuel flow with this filter?  Here are a couple pics of the front weight for those that asked.   Here are some of the 3 point.   |
Replies:
Posted By: Matt MN
Date Posted: 23 Feb 2012 at 5:56pm
|
you have a late model B those "pegs" are for the hydraulic cylinder. the "rings" are for use with the snap coupler on a B. Personally I would not use an inline fuel filter like that. I only use the sediment bowl as a filter. ------------- Unless your are the lead horse the scenery never changes!! |
Posted By: MNLonnie
Date Posted: 23 Feb 2012 at 5:57pm
|
The eye hooks look to be in the right spot for a snap coupler and I'd guess all the pins with holes in them are for hyd. cylinders? ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: R.W
Date Posted: 23 Feb 2012 at 9:36pm
|
Thanks guys, would you suggest a bigger filter? I like having a extra filter to keep crud out of the carb but one that small bothers me. ------------- In Search Of: 1958 Allis Chalmers D17 Diesel serial #9643D |
Posted By: Nathan (SD)
Date Posted: 24 Feb 2012 at 1:19am
| Those cast pins with the funny shape on the final drive are also snap coupler pieces. |
Posted By: orangeman
Date Posted: 24 Feb 2012 at 4:24am
| Nice Beefy weight on the front end and a tractor is in pretty nice shape. |
Posted By: BILLP-SE-MI
Date Posted: 24 Feb 2012 at 5:20am
|
R.W Some of those brackets look like some snap coupler B stuff.
1 HYD cyl bolt on bracket, (I) bolts on foot rest, and are the draw-bar pins cast and (S) shaped. At second look you do have some snap (B) parts.The front weight is home made. I ya get up by Temperance stop by. I'm off exit 5 on US 23
Have a good one BILL P
|
Posted By: Steve in NJ
Date Posted: 24 Feb 2012 at 6:41am
|
As far as the filter is concerned, as long as the filter is designed for gravity feed (small engine/lawn mower type) fuel systems, you shouldn't have any fuel flow problems. It will help trap the debris that got by the sediment bulb.
mailto:Steve@B&B" rel="nofollow - Steve@B&B
|
Posted By: R.W
Date Posted: 24 Feb 2012 at 9:38am
------------- In Search Of: 1958 Allis Chalmers D17 Diesel serial #9643D |
Nathan (SD) wrote: