Ca motor pics
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45991
Printed Date: 08 Sep 2025 at 6:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ca motor pics
Posted By: Josh Day
Subject: Ca motor pics
Date Posted: 21 Feb 2012 at 9:47pm
This is what was found wrapped up in the oil intake pipe.... other than that it looks clean and runs great (except the trans problem:)....  
|
Replies:
Posted By: SteveC(NS)
Date Posted: 22 Feb 2012 at 7:50pm
|
Josh, that looks pretty ugly allright but what is it? BTW the inerds look reall pretty! - like mine, but i still had the knock! It's on the back burner for now but I'll get to it (The elusive "round tuit")
|
Posted By: Josh Day
Date Posted: 22 Feb 2012 at 9:02pm
| plastic, some metal, and hair of some kind. other then that it looks good.I haven't got to run it much since I put the new gasket on since the trans problem. hope to get that fixed in a week or so. |
Posted By: BrettPhillips
Date Posted: 22 Feb 2012 at 9:21pm
| For all the crud in the oil screen, everything else sure is clean! Looks like someone believed in detergent oil for a long time. |
Posted By: B26240
Date Posted: 23 Feb 2012 at 6:41am
| Why did you take it apart? was there noise or no oil pressure? |
Posted By: Storming Norman
Date Posted: 23 Feb 2012 at 7:43am
|
From all the crud you have a picture of, might want to take bearing off and clean all the oil journals. I bought a tractor that had a tick in it, and part of the oil pump had broken, got beaten into a million pieces and a small piece of metal got caught in the oil journal to a rod bearing. Had to have crank turned. Had I caught it before I could have saved a bunch of money. |