Farm Equipment - wd/wd45 hand clutch spec.

Print Page | Close Window

wd/wd45 hand clutch spec.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45863
Printed Date: 08 Sep 2025 at 1:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd/wd45 hand clutch spec.

Posted By: Bob wi
Subject: wd/wd45 hand clutch spec.
Date Posted: 19 Feb 2012 at 12:33pm

putting a wd45 hand clutch in the wd, took it apart and look's good what is the correct clearance between the clutch disc/plate's so I get it simmed correct

Replies:

Posted By: stu(ON)
Date Posted: 19 Feb 2012 at 7:47pm

0.065"

Posted By: SteveM C/IL
Date Posted: 19 Feb 2012 at 10:24pm

Have a look at the plate the rollers ramp up on.You can turn it to get a new place to run on.The edge of the angle can get rounded. Sounds like yours may not have that much use/wear.