Blade Extension Cuttin Edge Replacement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45830
Printed Date: 08 Sep 2025 at 1:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Blade Extension Cuttin Edge Replacement
Posted By: Dave (NE)
Subject: Blade Extension Cuttin Edge Replacement
Date Posted: 18 Feb 2012 at 6:40pm
|
Finally got around to checking into the cuttin edge at CAT for the extension. Went to CAT. Found a six foot cutting edge with three of the four holes that would match up. Part #8D-2786. $106.26. Then had to have 18" cut off each end. Three of the four holes will match up. Following are some pictures. Edge as the six foot. Note that the cuts have already been made.  With the sextions cut and old edges. Well I'm still having troubles with the picture post so will have to wait till it is operating properly. But I plan on posting the pictures of the sections cut off and after mounting. We'll see how the picture post thing works later. Dave |
Replies:
Posted By: Travis(NE)
Date Posted: 18 Feb 2012 at 8:33pm
| Cool! Keep me/us posted as I may have to do the same thing soon. |
Posted By: Dave (NE)
Date Posted: 18 Feb 2012 at 8:41pm
| Tried to post more pictures, but it's just not working. Don't understand what's going on. |
Posted By: Travis(NE)
Date Posted: 19 Feb 2012 at 12:07pm
| Seen the other post with pictures and they look good Dave. Do the holes in the new 6' cutting edge line up with the holes for the main part of the Allis blade? |
Posted By: Dave (NE)
Date Posted: 19 Feb 2012 at 6:21pm
| Travis, it appears that the holes for the six foot edge will line up. The two end holes line up. Then there are holes every six inches. Consequesntly, that means there are holes in the edge that do not have holes in the blade. Let me know if you have questions. We still have to get together sometime, as we are so close. Thanks, Dave |
Posted By: EdIL
Date Posted: 20 Feb 2012 at 5:05pm
|
Guys, FYI You can save 1/2 if you buy 9W2297 cutting edge. The difference is the 9W2297 is not heat treated, but otherwise the same.
Regards
Ed
|
Posted By: michaelwis
Date Posted: 20 Feb 2012 at 5:28pm
I got mine from the county highway shop .. used but free .. the one i have on my sc blade is 20 years old . Good as the day i got it . ------------- WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60 GLEANER F 6060 7040.and attachments for all Proud to be an active farmer |