Farm Equipment - High Idle for D-17

Print Page | Close Window

High Idle for D-17

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45825
Printed Date: 09 Sep 2025 at 7:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: High Idle for D-17

Posted By: Bcjk
Subject: High Idle for D-17
Date Posted: 18 Feb 2012 at 5:14pm

I replacced the swivle that is under the gas tanl that hooks the throttle rod to the rod that comes back from the motor. How do I get the correct RPMs out of the tractor ? Wide open now it is about 1750rpms? Hope I made this clear. Would like to find a shop manual. I was a AC dealer in the 70"s Jim Kiewiet

Replies:

Posted By: XT in pa
Date Posted: 18 Feb 2012 at 6:11pm

Mine runs 2000 on the dot. But I don't kno if its right

-------------
190XT,D17and 7045

Posted By: DrAllis
Date Posted: 18 Feb 2012 at 6:50pm

If you reinstalled the ball socket in exactly the same spot on the link rod, it should run the same speed as before. Adjust/position things differently until you get the correct speeds (idle and high idle).