Ball Pak Bearing Conversion Question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45562
Printed Date: 08 Sep 2025 at 10:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ball Pak Bearing Conversion Question
Posted By: Mike(GA)
Subject: Ball Pak Bearing Conversion Question
Date Posted: 14 Feb 2012 at 1:32pm
| Is there cost effective way to convert from disc harrow ball pak bearings to a greaseable type bearing? |
Replies:
Posted By: Rfdeere
Date Posted: 14 Feb 2012 at 1:45pm
|
You might try something like this: http://www.ytmag.com/cgi-bin/viewit.cgi?bd=ac&th=143147" rel="nofollow - http://www.ytmag.com/cgi-bin/viewit.cgi?bd=ac&th=143147 ------------- Randy Freshour,Member Indiana AC Partners, http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com |
Posted By: Mike(GA)
Date Posted: 24 Feb 2012 at 3:42pm
| Bump |
Posted By: CTuckerNWIL
Date Posted: 24 Feb 2012 at 6:37pm
Not grease-able but you got the best answer there is for your question. If you don't want to do that and don't want to pay AGCO their price, you could part it out and by an International Disc. An old Allis farmer I know, claimed they were the best disc made at the time anyway. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Mike(GA) wrote:Posted By: John (C-IL)
Date Posted: 24 Feb 2012 at 8:40pm
| Agree with Charlie, that is the most inovative idea I have seen and can pretty much be accomplished with off the shelf parts. |