Print Page | Close Window

Need help with serial number

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45514
Printed Date: 05 Aug 2025 at 1:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Need help with serial number
Posted By: ACscott
Subject: Need help with serial number
Date Posted: 13 Feb 2012 at 4:04pm
Hi guys just looked at a tractor it has wd45 decals and a curved shifter, but the serial number is 156638 so what is it a wd45 or a wd. Thanks the serial number charts are confusing me.



Replies:
Posted By: Rfdeere
Date Posted: 13 Feb 2012 at 4:06pm
   1953 WD45

-------------
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com


Posted By: 79fordblake
Date Posted: 13 Feb 2012 at 4:08pm
That would be a WD serial number by what I have wrote down. I don't know what site I got if off of...guess its no good.


Posted By: Unit3
Date Posted: 13 Feb 2012 at 4:08pm
The WD started at 7 in 1948 and stopped at 146606 in 1953. The WD45 starts at 146607 in 1953 and goes to 236958 in 1957. Yours is a 1953 WD45.


Posted By: CAL(KS)
Date Posted: 13 Feb 2012 at 4:09pm
norms book says 45 started in 1953 at 146,607 and went to 160,385
 
so it is a 53 WD45


-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15


Posted By: ACscott
Date Posted: 13 Feb 2012 at 4:25pm
Thanks guys.


Posted By: Gary
Date Posted: 13 Feb 2012 at 5:10pm
and WD started at serial WD127XXX in 1953 with the curved shifter - often referred to as the 45 transmission.
 
Gary


Posted By: Unit3
Date Posted: 13 Feb 2012 at 5:35pm
I have even seen one without a S.N. I was told that the rear end got out of the factory with a crack in it. So at the dealership, it was changed out with a new one under warranty and it was never stamped.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net