Farm Equipment - d15 disributor dust cover

Print Page | Close Window

d15 disributor dust cover

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45495
Printed Date: 06 Sep 2025 at 6:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d15 disributor dust cover

Posted By: cobra
Subject: d15 disributor dust cover
Date Posted: 13 Feb 2012 at 11:33am

i picked up a tune up kit for d15 sries II. in it was a dust cover for the dist. the hole seems too small to fit over the rotor shaft but parts man says its the right one.im afraid too force it. is this supposed to be a snug fit and is there more than one dust cover for this dist. its a dr-1111411 thanks smitty

Replies:

Posted By: GregLawlerMinn
Date Posted: 13 Feb 2012 at 12:36pm

It is a snug fit. That said, the Chinese definition of a snug fit is not always the same as ours. Believe the hole thru the cover has a felt seal to prevent dust from getting into the distributor. Best of my knowledge, there is only one size dust cap.

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: cobra
Date Posted: 14 Feb 2012 at 5:16am

thanks for the help smitty

Posted By: Steve in NJ
Date Posted: 14 Feb 2012 at 6:20am

One size fits all sota' speak. Greg is right on. They are a little extra snug, but they fit.

mailto:Steve@B&B" rel="nofollow - Steve@B&B