Construction and other equipment - HD6G track removal/Parts

Print Page | Close Window

HD6G track removal/Parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45300
Printed Date: 23 Jun 2025 at 10:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD6G track removal/Parts

Posted By: Arthros
Subject: HD6G track removal/Parts
Date Posted: 09 Feb 2012 at 11:33pm

I am parting out an old HD6G loader and need help on removing the tracks. Does anyone have a detailed picture on where the pins are to take out the tracks and how they come out? Also does anyone know the weight of this machine and what some of these parts would sell for? Thanks in advance for your help.

Replies:

Posted By: dadsdozerhd5b
Date Posted: 10 Feb 2012 at 6:35pm

the master pin is dimpled on the end of the pin in the center. it is as simple as driving it out. it is as hard as driving it out. backup the inside of the track with a piece of pipe blocked against the frame so the link doews not move and spread as you drive it out. it may require some heat on the link to get it to move. my hd5g witha winch on the back weighed 18000 if i remember right. might be a little high on the weight. my hd5b with dozer blade weighs 12ooo lbs. where are you located and are you selling everything as parts? good luck.

-------------
HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE.

Posted By: Dozer
Date Posted: 10 Feb 2012 at 8:11pm

If the motor has the second design intake manifold I would be interested in buying it. If the motor has the cast iron exhaust manifold I would be interested in that also.

Posted By: skybum1
Date Posted: 12 Feb 2012 at 9:20pm

I need the water pump off your hd6g if you still have it.

Posted By: gemdozer
Date Posted: 13 Feb 2012 at 4:36am

I am still have some HD6G water pump

Posted By: skybum1
Date Posted: 13 Feb 2012 at 6:19am

gemdozer wrote:

I am still have some HD6G water pump

Hector, Yes I still need a water pump. Does your pump look like this one? Can you post picture of yours and way to arrange shipping and payment?

Thanks,

John

Posted By: gemdozer
Date Posted: 13 Feb 2012 at 12:32pm

I am going to my small shop and get the part number on the water pump and getback to you.