WD45 Parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45168
Printed Date: 03 Sep 2025 at 5:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 Parts
Posted By: countryguy828
Subject: WD45 Parts
Date Posted: 07 Feb 2012 at 7:52pm
|
A friend of mine is preparing to junk some WD45s and we thought we would should probably list some of the usable parts to see if there was any interest in them.
He has:
WD-9 front loader - no bucket
Another Front Loader, possibly New Idea - missing cylinders
4 bolt wide front end needs a little repair work
Snap Coupler Bells and Latches
Snap Coupler to 3pt. adapter - Looks like a Cross Unit
Snap Coupler 3 Bottom Plow
Rear Tool Bar with some shovels on it
Located South East of Greenville, Ohio
We are unsure of the value of these items at this time, so any help on that would be great.
Dave
|
Replies:
Posted By: Rfdeere
Date Posted: 07 Feb 2012 at 7:53pm
|
What's wrong with the tractors ? ------------- Randy Freshour,Member Indiana AC Partners, http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com |
Posted By: countryguy828
Date Posted: 07 Feb 2012 at 8:13pm
|
Both tractors sat out for many years without exhuast covered and both engines are locked up solid. Also all of the wheels are shot. We figure it will cost more to fix them than what they are worth.
Dave
|
Posted By: CTuckerNWIL
Date Posted: 07 Feb 2012 at 10:10pm
|
Blocks might be worth something, and the tranny gears could help somebody put one back in the field.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Pat the Plumber CIL
Date Posted: 07 Feb 2012 at 10:13pm
|
Carbs ? probably shot but I need one ------------- You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails 1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF. |
Posted By: Dave in il
Date Posted: 07 Feb 2012 at 10:37pm
|
Hyd pumps should be ok, I'd like a hinge for folding the seat over if one has it. ------------- AGCO My Allis Gleaner Company |
Posted By: lmc122
Date Posted: 08 Feb 2012 at 12:49am
| I would be interested in the loader, what wouldd they want for it. |
Posted By: JayIN
Date Posted: 08 Feb 2012 at 6:59am
|
I may be interested in the toolbar with shovels on it...... ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: Don(MO)
Date Posted: 08 Feb 2012 at 7:36am
|
What work will the four bolt front end need done to it and can you put some pics up here for all of us to look at.
Thanks, Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: jjwo
Date Posted: 08 Feb 2012 at 8:19am
|
Dave - I have a folding seat hinge if you don't find one.Let me know, I'll have to dig it out. |
Posted By: countryguy828
Date Posted: 08 Feb 2012 at 11:58am
|
Don
Not a whole lot of work, the rear pivot point bolt/pin is broken off a new one will need welded on and one of the tie rods is mangled. Thats all I know of. $300 for it
Dave
|
Posted By: Gary in Texas
Date Posted: 08 Feb 2012 at 1:58pm
|
How much you talking for the sc bell, latch, spring, chain and release lever. and the lift arm latches?
and shipped to Burkburnett, TX 76354??
Thanks for your time.
|
Posted By: countryguy828
Date Posted: 08 Feb 2012 at 2:45pm
|
Here are some pictures I captured today. They are in no order. Most are pretty good in size so I didn't want to waste the forums storage space so I have posted them to my private site here:
http://laugheadland.com/wd45/" rel="nofollow - http://laugheadland.com/wd45/
|
Posted By: kentv
Date Posted: 09 Feb 2012 at 1:07pm
| Do you still have a pair of latches. And also, do you have the steel hydraulic line that runs to the rear of the tractor. |
Posted By: countryguy828
Date Posted: 09 Feb 2012 at 1:39pm
|
Hey guys, just wanted to update a bit. My friend that owns the tractors had a death in the family and it is going to slow us down a few days on getting anything taken care of with the tractors.
Just wanted to let everyone know.
Dave
|
Posted By: countryguy828
Date Posted: 28 Feb 2012 at 12:08pm
|
If you are still interested in the toolbar I finally was able to ge a picture of it in the daylight for you. One of the teeth broke off as we extracted it from the tree but we have it possibly it could be welded back on.
Thanks - Dave
 |
Posted By: JayIN
Date Posted: 29 Feb 2012 at 7:00am
|
I dont understand how the toolbar hooks up. Does it snap into the bell coupler? Is it all there? ------------- sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?" |
Posted By: Dusty MI
Date Posted: 29 Feb 2012 at 7:30am
|
Jay, that looks like the rear for the front mounted cultivator. the 2 arms/straps with holes hook to the draw bar bale, and the other arms/straps hook to the lift arms. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Ted J
Date Posted: 29 Feb 2012 at 8:02am
|
Do you have the cover that fits over the Belt Pulley hole? Worth a couple of bucks to me.
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |