Allis C fenders
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44873
Printed Date: 29 Aug 2025 at 4:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis C fenders
Posted By: AJ
Subject: Allis C fenders
Date Posted: 02 Feb 2012 at 7:21am
|
I have seen two or three different fenders on the allis c. One i have seen with two little bracket tabs that attach to the frame rail. The other didn't. Which it correct or incorrect. I thought the one with the tabs were suppost to be on the allis B. Anyone know the difference or what is correct?
------------- Can't fix stupid |
Replies:
Posted By: Ken in Texas
Date Posted: 02 Feb 2012 at 8:05am
|
AJ
If you saw fenders with flat brackets that fit over the fender supports they were B fenders. C fenders are not the same as B fenders. Nobody reproduces a real C fender either. Not all B fenders had the brackets either. With the brackets they fit inside the support. Without the brackets they bolt to the outside of the support
You will see two types of C fenders. Those with the beaded top edge and those without the bead. All have the two vertical stiffening bumps stamped into them. I believe some are 2 piece and some are one piece. The little three cornerd lower front section is a separate piece on most.
|
Posted By: Dick L
Date Posted: 02 Feb 2012 at 11:03am
C fenders had the ribs the others don't.   |