Farm Equipment - Allis Chalmers Disk Plow

Print Page | Close Window

Allis Chalmers Disk Plow

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44314
Printed Date: 07 Jun 2025 at 6:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Chalmers Disk Plow

Posted By: kniesshy
Subject: Allis Chalmers Disk Plow
Date Posted: 23 Jan 2012 at 9:50am

How much is a snap coupler disk plow worth? decent shape just needs paint?

How much would a snap coupler plow be worth fixed up and mint conditon?

Also how much is a snap coupler 6' disk worth in mint condition and all good bearings and disk blades? If someone could answer these questions asap that would be great!

Replies:

Posted By: Eldon (WA)
Date Posted: 23 Jan 2012 at 10:31am

Quite a bit

Not so much

Depends on model

(Based on the info provided)

-------------
ALLIS EXPRESS!
This year:

Posted By: Don(MI)
Date Posted: 23 Jan 2012 at 10:49am

Just curious, whats the value of a #40 disc with new bearings, in great shape, with new paint?

-------------
Galatians 5:22-24

"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"

Posted By: Eldon (WA)
Date Posted: 23 Jan 2012 at 11:05am

Don(MI) wrote:

Just curious, whats the value of a #40 disc with new bearings, in great shape, with new paint?

At $150 per bearing it would have $1200 just in bearings....I would think that is probably the most you could get out of one. Again, it depends on if you really need a heavy disc because they just don't make them that heavy anymore. If I had the opportunity to buy one in like new condition I would gladly pay $1500 for one....about 25 hours of custom work and it would be paid for!

-------------
ALLIS EXPRESS!
This year:

Posted By: Dwayne TX
Date Posted: 23 Jan 2012 at 11:20am

A lot depends on the part of the country, here a SC moldboard can be had cheap, like $150 - $200 cheap. Really, SC tandems, too. I got an 8' tandem and a two bottom rollover moldboard for $500 total. Both have original paint and are field ready, but not mint.

Posted By: Don(MI)
Date Posted: 23 Jan 2012 at 11:54am

Ok, question 2 then,

Where can I find bearings, cheap, for a #40 disc? Talking to richard the other day, and he says some guys are using 2 1" bearings, instead of 1 bal-pak, to save on cost!

I need bearings for my disc, but don't want to spend a fortune!!

-------------
Galatians 5:22-24

"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"

Posted By: Brian F(IL)
Date Posted: 23 Jan 2012 at 11:57am

Don,

Check with Larry Swenson. He may still have some Bal-Pak bearings if you want to go that route. They're not exactly cheap.

Posted By: Don(MI)
Date Posted: 23 Jan 2012 at 11:59am

Ya, I seen that about a month ago Brian, hoping to find something cheaper. Maybe!! I hope! LOL

-------------
Galatians 5:22-24

"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"

Posted By: TexasAllis
Date Posted: 23 Jan 2012 at 12:15pm

Don(MI) wrote:

Ya, I seen that about a month ago Brian, hoping to find something cheaper. Maybe!! I hope! LOL

Did you try Shoup?

Posted By: Don(MI)
Date Posted: 23 Jan 2012 at 12:20pm

No, they got a phone #? Whats there location?

-------------
Galatians 5:22-24

"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"

Posted By: John (C-IL)
Date Posted: 23 Jan 2012 at 12:38pm

Don(MI) wrote:

No, they got a phone #? Whats there location?

http://www.shoupparts.com" rel="nofollow - http://www.shoupparts.com

Posted By: Don(MI)
Date Posted: 23 Jan 2012 at 12:43pm

Thanks John, will have to see if shoups or ASC is cheaper.

http://www.agrisupply.com/ag-tillage/c/6000186/filter/100000001319eq100000000173/" rel="nofollow - http://www.agrisupply.com/ag-tillage/c/6000186/filter/100000001319eq100000000173/

-------------
Galatians 5:22-24

"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"

Posted By: TexasAllis
Date Posted: 23 Jan 2012 at 2:24pm

Don(MI) wrote:

Thanks John, will have to see if shoups or ASC is cheaper.

http://www.agrisupply.com/ag-tillage/c/6000186/filter/100000001319eq100000000173/" rel="nofollow - http://www.agrisupply.com/ag-tillage/c/6000186/filter/100000001319eq100000000173/

I replaced bearings on the back gang of a 10' Athens offset disk with bearings from Shoup. They had exactly what I needed.

Posted By: kniesshy
Date Posted: 23 Jan 2012 at 6:34pm

Gimme a price range on a snap coupler disk plow at mint condition. like new

What model disk do i have? its about 6ft wide and has no wheels. if you know exactly the model whats one worth with new bearings in mint condition??

Posted By: ctbowles58
Date Posted: 23 Jan 2012 at 7:29pm

THE LAST ONE I SEEN SELL AT A SALE WAS A 3 DISK AND BROUGHT $400.00 I BOUGHT MINE 27 YRS AGO FOR $75.OO I WAS OFFERD $300.00 FOR MINE 2 WEEKS AGO AND DID NOT SELL.