Farm Equipment - D17 Governor Rod Size

Print Page | Close Window

D17 Governor Rod Size

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44157
Printed Date: 19 Aug 2025 at 9:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 Governor Rod Size

Posted By: 79fordblake
Subject: D17 Governor Rod Size
Date Posted: 20 Jan 2012 at 12:16pm

I used swivel joints to get the slop out of the throttle linkage on my buddies D17. The linkage was worn bad. The first rod I put swivels on both ends...they are the same as the one I put on my WD45..(1/4).
The rod that connnects to the governor is a different size though..is it 5/16? Wanted to make sure before I ordered one. Thanks.