jack screw bolts 190XT?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42994
Printed Date: 23 Jun 2025 at 3:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: jack screw bolts 190XT?
Posted By: captaindana
Subject: jack screw bolts 190XT?
Date Posted: 30 Dec 2011 at 5:36pm
| Hi guys if I remembered the terminology correctly my friend asked me to inquire as to the availability of jack screws for a 190XT. If I have the name messed up he wants the 3 bolts that screw into the center hub which move the hub on the axel. Are any of these bolts available? Thanks, Dana |
Replies:
Posted By: smokey
Date Posted: 30 Dec 2011 at 5:47pm
|
I do think they are available yet I picked 3 of them up a couple yrs ago, they was a little salty on $ if I remember right! but you won't move them hubs without them bolts, just careful not to put to much power on one bolt at a time you could break the casting where you thread the jack bolt in,
Good luck
If you was closer I would let you use mine, lol
|
Posted By: Eldon (WA)
Date Posted: 30 Dec 2011 at 7:17pm
Here's what they look like. Someone suggested using a grade 8 bolt and a hardened slug...
 ------------- ALLIS EXPRESS! This year: |
Posted By: injpumpEd
Date Posted: 30 Dec 2011 at 8:29pm
|
the smaller ones used up to D21's are different than the large ones like 210/220, and 7000/8000 series tractors used. The smaller ones are not as pricey, and I think they are a standard thread pitch/diameter.
------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: Ray
Date Posted: 30 Dec 2011 at 9:12pm
| SS$105.00 GOOD,USED,ORIGINAL. 785-353-2392 |
Posted By: Amos
Date Posted: 31 Dec 2011 at 7:37am
| The larger ones that fit the 210/220 are the same as the ones that fit the Case IH 9110. I use them for both here, don't know the cost as they came with the tractor. The smaller ones I have for the 200, XT I bought from AGCO in the lat 90's and I think all three wereless than $30 back then. |