Farm Equipment - D14 engine kit 160

Print Page | Close Window

D14 engine kit 160

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42907
Printed Date: 19 Aug 2025 at 1:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 engine kit 160

Posted By: WD45
Subject: D14 engine kit 160
Date Posted: 29 Dec 2011 at 9:16am

Will a 160 engine kit fit D14 block.

Will 160 valve train fit D14 head or use 160 head

on the D14 block.

-------------
Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H

Replies:

Posted By: Charlie175
Date Posted: 29 Dec 2011 at 9:59am

I think the D15 crank is different? Can't remember though

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: norm[ind]
Date Posted: 29 Dec 2011 at 8:11pm

no will not fit correctly orings for sleeves are on sleeves for 149

orings on a 160 are in b lock my 2 cents

Posted By: Chalmersbob
Date Posted: 29 Dec 2011 at 9:28pm

O rings for a 149 are in the block. I just installed an engine full of them.

There are some differences in the early 149 block and the later ones.

I have a 57 D14 and a 62 D15, both 149 cubes, but are different.

Very obvious around the oil filter and govenor. Bob