Farm Equipment - 160 power steering parts/460 loader

Print Page | Close Window

160 power steering parts/460 loader

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=4285
Printed Date: 28 Jan 2025 at 11:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 160 power steering parts/460 loader

Posted By: Gary(WI)
Subject: 160 power steering parts/460 loader
Date Posted: 27 Nov 2009 at 12:22pm

having trouble finding 160 power steering parts there used to be a website for foreign a/c parts cannot find it anymore any help would be apreciated also need fill cap for 460 loader do not know if it is a dipstick or just a cap Thank You Gary Roidt call or email me 920 253 8192 mailto:gdallis@hurleycomputers.com - gdallis@hurleycomputers.com

Replies:

Posted By: Dave (NE)
Date Posted: 27 Nov 2009 at 7:44pm

This may be the site you are referring to, however they say no power steering parts for the 160: http://importtractorparts.net/AC.html - http://importtractorparts.net/AC.html

Posted By: Flyer
Date Posted: 27 Nov 2009 at 8:46pm

I saw a post on another forum that mentioned fabricating a new bracket and adapting a different pump. I'm getting ready to restore my 160 and it looks like finding parts is going to be a bit of an adventure.

-------------
An optimist sees the glass as half full. The pessimist sees the glass as half empty. The engineer sees a glass with double the required capacity.

Posted By: Dave (NE)
Date Posted: 27 Nov 2009 at 10:16pm

Yeah, parts can be difficult to come by, and expensive when you do locate them.

Posted By: ACNY
Date Posted: 01 May 2010 at 8:53am

Flyer:

Did you restore your 160? Having problems with my 160 steering, no leaks but the wheel turns with no effect on the steering. Did you change your pump? Can you give me any information on changing the pump?

Thanks,

Wayne

Posted By: Gary(WI)
Date Posted: 01 May 2010 at 9:24am

I made one pump out of 2 and found a new center section I think you can still get shaft and gears from agco I put new bearing in it also and it worked ok Can try and help you if you need Gary 920 253 8192

Posted By: Flyer
Date Posted: 02 May 2010 at 8:26am

I haven't done anything with mine yet. I'm still putting money aside for the project.

-------------
An optimist sees the glass as half full. The pessimist sees the glass as half empty. The engineer sees a glass with double the required capacity.