Farm Equipment - hyd pump gasket WD45

Print Page | Close Window

hyd pump gasket WD45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=4257
Printed Date: 28 Jan 2025 at 12:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: hyd pump gasket WD45

Posted By: Vinnie/S.D.
Subject: hyd pump gasket WD45
Date Posted: 26 Nov 2009 at 12:32pm

This is on a WD45 Allis.On the hyd pump the gasket on the right end of the pump (four bolts holding it on) I keep blowing that gasket out and the oil just gushes out, What am I doing wrong? The gasket I put in is a very thin one, try to tighten all the bolts the same tork???? vince/s.d.

Replies:

Posted By: ALinIL
Date Posted: 26 Nov 2009 at 7:30pm

Vinnie - I assume you are refering to the small plate that holds the control valve and the unloading valve in-place. You need to put new O-rings on both. That should solve the problem. - Al Happy Thanksgiving!!