Farm Equipment - Model "CA"

Print Page | Close Window

Model "CA"

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42269
Printed Date: 01 Oct 2024 at 5:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Model "CA"

Posted By: witteman
Subject: Model "CA"
Date Posted: 17 Dec 2011 at 10:00am

Hi ppl, I have a model "CA" and I can't get the cylinder to lift the mower or even move. it wont go up or down. I have checked the fluid and i have pleanty it seems. I there something else i can check or do to get it to work? Dont know much about this tractor as we just got it running but it hasnt been long since it was used and it came with the mower hooked to it.Any help is greatly appreiated. Thanks..< id="gwProxy" ="">< ="jsCall;" id="jsProxy" ="">

Replies:

Posted By: Gary(MO)
Date Posted: 17 Dec 2011 at 10:03am

Is your PTO engaged? PTO has to be engaged for hydraulic pump to work.

Posted By: Jeff Z. NY
Date Posted: 17 Dec 2011 at 10:12am

Push down on the clutch when engaging it or else you will hear some bad sounds> LOL

-------------
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}

Posted By: witteman
Date Posted: 17 Dec 2011 at 10:42am

thanks guys, ill go give this a try , seems to me the pto was dissengaged< id="gwProxy" ="">< ="jsCall;" id="jsProxy" ="">

Posted By: Eldon (WA)
Date Posted: 17 Dec 2011 at 11:07am

Yes with the pto on, the lift arms should come up first and then the remote cylinder will extend. If the pto is running and the arms won't lift you may have a check ball stuck in the pump. I always try pumping the lift arms up and down if this happens and sometimes they come back to life...otherwise you have to remove the pump and clean it up which is a PITA. Also check the fluid level (same as rear end, dipstick in front of LH axle.)

-------------
ALLIS EXPRESS!
This year: