Woods 42G mower
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42074
Printed Date: 16 Nov 2024 at 4:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Woods 42G mower
Posted By: Midway2485
Subject: Woods 42G mower
Date Posted: 13 Dec 2011 at 5:45pm
|
I acquired a woods belly mower this fall and it turns out it is for a AC Model G tractor. I was told over the phone it was for a Cub Farmall. It is in very good shape, looks to have been stored inside and has brackets and even a belt. I was confused becasue it is red but contacted Woods and they said the early models were red. The name plate is very legible. I am interested in selling it. If there is any interest I can get a good picture to send. Originally thought of modifying it to fit but decided against that.
Thanks
|
Replies:
Posted By: MNLonnie
Date Posted: 13 Dec 2011 at 6:34pm
|
Where are you located and how much are you asking? ------------- Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker |
Posted By: Midway2485
Date Posted: 14 Dec 2011 at 4:49pm
|
I am in east Tennessee. I just hauled it down here from SW Minnesota in October. I was told it was for a Cub. I don't have a feel for Allis stuff but i want $800.00 for it. |
Posted By: Scott(GA)
Date Posted: 14 Dec 2011 at 5:20pm
Does that include the sheave (pulley) that mounts on the G's PTO?
Best regards,
Scott
|
Midway2485 wrote:Posted By: Midway2485
Date Posted: 14 Dec 2011 at 7:18pm
| No pto pulley for tractor. HaS the clutch drive pulley and two tensioning pulleys under the shield. The name plate is on the shield. If you are interested is seeing it I can get a picture this weekend. |
Posted By: wbecker
Date Posted: 14 Dec 2011 at 9:21pm
|
The Woods website has all the manuals PDF. ------------- Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152 |
Posted By: Scott(GA)
Date Posted: 15 Dec 2011 at 7:19am
Pictures are always welcome. I'd like to see it!
Best regards,
Scott
|
Posted By: CTuckerNWIL
Date Posted: 15 Dec 2011 at 8:09am
|
I think I know where there are 3 Cub mowers and I want one for a G. I believe the 42 inch mower is the same for either tractor. The mounting brackets would be different. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Bill Long
Date Posted: 15 Dec 2011 at 1:09pm
|
You may be able to go to the Woods Web Site and order brackets for a Cub. Good Luck! Bill Long |
Posted By: wbecker
Date Posted: 15 Dec 2011 at 2:59pm
Bill B ------------- Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152 |
Posted By: CTuckerNWIL
Date Posted: 15 Dec 2011 at 4:52pm
I went to a Woods dealer a couple years ago and asked about buying brackets for the G Allis. The guy called Woods and I was told they don't sell a "KIT" . I don't know what that means. You might be able to buy individual pieces. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Midway2485
Date Posted: 15 Dec 2011 at 6:33pm
| I will get a picture this weekend to see just what is there. I bought a parts cub just for the woods 42C mower. |
Posted By: Midway2485
Date Posted: 15 Dec 2011 at 6:36pm
| Decks for 42's look the same. Same skid arms, clutch. Width of arms is different and the G has two tensioning pulleys. |