Construction and other equipment

Print Page | Close Window

off brand question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41576
Printed Date: 24 Jun 2025 at 5:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: off brand question

Posted By: cowkicker
Subject: off brand question
Date Posted: 04 Dec 2011 at 3:32pm

First I want to say hello, this is my first post in the construction forum. I have noticed some familiar names from the other forums on here, so I don't feel like a complete stranger. My problem is with a 1980 TD15C International powershift dozer. The trans quit pulling on the low/forward side. The high/forward, low/reverse, and high/reverse side all work as they should. I have checked the pressures at the range control valve and everything checks okay. These trans only have 4 clutch packs, forward, reverse, low, and high. With all this said, wouldn't this mean that it would have to be a hard part in the trans. This is first time I've had trouble with the trans and was looking for some help, advice, or hopefully someone that has experienced this problem could help. Any suggestions, I really need to get this machine going. Thanks

Replies:

Posted By: ianoz
Date Posted: 04 Dec 2011 at 5:17pm

Your best bet would be to sign up on the redpower forum,plenty of good inter help available over there .

http://www.redpowermagazine.com/forums/index.php?&act=Login&CODE=00 - http://www.redpowermagazine.com/forums/index.php?&act=Login&CODE=00

Does take a while to get registration OKed .