HD6 Dozer
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40837
Printed Date: 26 Jun 2024 at 12:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6 Dozer
Posted By: MD Norton
Subject: HD6 Dozer
Date Posted: 20 Nov 2011 at 11:15am
|
I have a HD6 Dozer for sale, starts and runs good, automatic transmission, external roll cage, 2 rear hydrolics. Needs a little work on the oil return port. Gasket has slipped down over the return port so the oil from the final drive to the filter housing is slow causing loss of transmission pressure after an hour or so of use. let it set a couple hours and it pulls good again for a while. Not an expensive fix, just time consuming.
|
Replies:
Posted By: CaidAC
Date Posted: 20 Nov 2011 at 7:29pm
|
What are you asking? When you say time consuming-how long do you think. What's undercarriage like.
|
Posted By: Dozer
Date Posted: 22 Nov 2011 at 4:15pm
|
What are you asking for it and where is it located
|
Posted By: MD Norton
Date Posted: 22 Nov 2011 at 5:51pm
|
My HD6 is located near Alamosa Colorado and I am asking $8000. To fix the final drive gasket would take maybe 3 hours to take it apart then a couple hours to clean off the old gasket and get it ready to go back together. then mybe 3 hours to reassemble depending on how fast you work. If you're creative you may be able to get to it through the screen housing. I was able to ge a little more flow with an arrow, but not enough to fix the problem.
|
Posted By: MD Norton
Date Posted: 22 Nov 2011 at 5:55pm
|
The under carriage is at least 70% with no visible wear. The tractor has less than 2000 hours on it.
|
|